"a component or equipment not attached to the lifting machinery, allowing the load to be held, which is placed between the machinery and the load or on the load itself, or which is intended to constitute an integral part of the load and which is independently placed on the market; slings and their components are also regarded as lifting accessories"

zaw linowe1
tekstylne1

Textile slings and their components

Assembly of one or more sewn webbing components for attaching loads to the hook of a crane or other lifting machine

EN 1492 parts 1, 2 & 4

zaw linowe1
zaw linowe2

Steel wire rope slings and their components

Assembly of one or more steel wire rope legs or an endless sling for attaching loads to the hook of a crane or other lifting machine

EN 13414 parts 1, 2 & 3

zawiesie lancuch

Chain slings and their components

Assembly of one or more chains for attaching loads to the hook of a crane or other lifting machine

EN 818  parts 1 to 8 

ucho nakr
ucho przykr
ucho wkr

Lifting eyelets

Eyelets intended to be placed on the load by threading for lifting it

(when independently placed on the market)

ucho1 spaw
ucho2 spaw
ucho3 spaw

Lifting eyelets

Eyelets intended to be placed on the load by welding for lifting it

(when independently placed on the market)

blacha spaw

Lifting ear

Steel plate with a hole intended to be welded to a load for lifting it

(when independently placed on the market)

anchor1
anchor2

Lifting anchor

A device intended to be integrated into a structure (e.g. a concrete units, concrete panel) in order to provide an anchorage for lifting the structure

Rope eyelet

naroznik

Corner fitting

Corner fittings intended to be integrated in ISO containers by welding for lifting them

(when independently placed on the market)

C hak1
C hak2

C-Hook

Equipment in the form of a ā€˜Cā€™ used for lifting hollow loads e.g. coils, pipes etc.

EN 13155

(Such equipment is considered as a lifting accessory when it is not permanently attached or fixed to the lifting machinery, in other words, when the machinery can be used to lift loads without the equipment or with other lifting accessories)

clamp1
clamp2

Clamp

Equipment used to handle loads by clamping on a specific part of the load ā€“ also known as tongs

EN 13155

 **

kontener1

Container spreader beams

Container spreader beams placed between lifting machinery and the load in

order to attach it * *

reference: 98/37/EC Committee Doc. 2003.13rev.1

forks

Lifting forks

Equipment consisting of two or more arms fixed to an upright with an upper arm, essentially to lift palletised or similar loads* *

standard: EN 13155

plate clamp
plate clamp2

Plate clamps

Non powered equipment used to handle steel plates by clamping them between jaws * *

standard: EN 13155

lifting magnet

Lifting magnet

Equipment with a magnetic field creating sufficient force for gripping, holding and handling loads  with ferromagnetic properties* *

standard: EN 13155

NOT CONSIDERED AS LIFTING EQUIPMENT:

forklift

Forks attached to a lift truck

Forks attached to a masted or variable reach industrial truck for holding the load.

ARE NOT CONSIDERED AS LIFTING EQUIPMENT

Such forks are part of the machinery subject to Directive 2006/42/EC

Contact

Machinery Design Office
INBIURO Ltd / UNITED KINGDOM

mob. UK +44 7427755022 (WhatsApp available)

mob. PL +48 504910343
Tomasz Sienczak MSc. eng.,

Companies House registration number: 11950373

© Machine Design Services Inbiuro 2019